Aetechstone Nano Glass is an extremely durable and compact material, but requires particular skills when cutting and fabricating. FINISING SHOULD BE CARRIED OUT BY TRADESMEN WHO HAVE BEEN TRAINED by PROFESSIONALS.
Artechstone Nano Glass is the most advanced versions of Nano glass, both in versatility and cutting and finishing. It allows a more precise cut to the end and detailed finishes.
Before starting any process, check all safety procedures and in particular to the use of cutting tools. Cutting blades should be made from diamond for marble or glass crystals. Thet must be very well sharpened and in perfect condition, without broken or chewed parts or disks. The thickness of the blade should be 1.8 to 3.4mm.
Heat and sharpen the blade for at least 15 minutes before starting any cutting. You should also make sure that you have sufficient and constant cooling water throughout the process. You should also be sure to check if the cutting table is stable as its balance can cause damage to the stone. Be aware of the cutting speed during the process: the regular bed / table speed should be between 2.5 and 4m / min. To cut an Artechstone Super Nano plate, the first cut should be the length of the plate and the second, in the direction of the plate width.
For cuts made in sheets above 18mm we recommend to make the cut in two steps. In the first step, one blade should reach half the plate and in the second step, it should cover another half to finish the cut. To perform this procedure a plate cannot have any lateral movement. It is imperative that the disc is perfectly aligned with a cut direction.
ARTECHSTONE NANO GLASS VANITY TOP
Elegant, Resistant, Sustainable and Practical:
IS THE COLLECTION ARTECHSTONE VANITY TOP.
100% Nano Glass
OFFERING THE SAME ADVANTAGES OF THE NANO SLABS
The vats are stain resistant, Absorption of liquids, Resistant to scratches and Abrasion.
Resistant to acids, Resistant to alkaline, Resistant to dirt and bacteria